Issue List

Filtered by: Products (Finished Items) Change Filter Remove all filters

Products

All Products
Finished Items
Hopper Gauge
Reabe Smart Gate

Types

All Types
Default Type
GPS
Mechanical
Pressure Gauge
Software

Status

All Statuses
Complete
Default Status
Holding
In Work
New

Priorities

All Priorities
Critical
Default Priority
High Priority
Low Priority

Software	Calibration Error Lockup
ID: 606 Product: Finished Items Version: A0 110 Report Date: July 3, 2021
Status: Complete Priority: High Priority Reporter: John Flatt

Software	Trim Pass Function
ID: 605 Product: Finished Items Version: A0 112 Report Date: June 4, 2021
Status: Complete Priority: Default Priority Reporter: John Flatt

Pressure Gauge	Hopper Speed setting needing to Go Lower
ID: 472 Product: Finished Items Version: A0 21 Report Date: June 5, 2020
Status: Complete Priority: Critical Reporter: Nick Yoder

Software	Spray Relay and Hopper Sensor
ID: 436 Product: Finished Items Version: a0 10 Report Date: April 12, 2020
Status: Complete Priority: Default Priority Reporter: Nick Yoder

Software	Jam Current Levels
ID: 413 Product: Finished Items Version: N/A Report Date: March 27, 2020
Status: Complete Priority: High Priority Reporter:

Software	GPS RS-232 in Liquid Mode
ID: 412 Product: Finished Items Version: A0 05 Report Date: March 27, 2020
Status: Complete Priority: High Priority Reporter: John Flatt

Software	Finer Gate Adjustment
ID: 411 Product: Finished Items Version: A0 05 Report Date: March 27, 2020
Status: Complete Priority: Default Priority Reporter: John Flatt

Software	Heavy Material Rock Light
ID: 410 Product: Finished Items Version: N/A Report Date: March 27, 2020
Status: Complete Priority: Default Priority Reporter:

Software	Metric Units
ID: 404 Product: Finished Items Version: a0 02 Report Date: February 12, 2020
Status: Complete Priority: Default Priority Reporter: Troy R Reabe

Software	Setup Menu Lockup
ID: 403 Product: Finished Items Version: a0 02 Report Date: February 12, 2020
Status: Complete Priority: Critical Reporter: Troy R Reabe

GPS	ADD AgPilot X
ID: 402 Product: Finished Items Version: a0 112 Report Date: February 7, 2020
Status: Complete Priority: High Priority Reporter: Troy Reabe

Software	Setup- Set Motor Position
ID: 400 Product: Finished Items Version: a0 02 Report Date: February 5, 2020
Status: Complete Priority: High Priority Reporter: Jeff

Software	Link Basic/Manual Position to Constant Rate Position
ID: 399 Product: Finished Items Version: a0 02 Report Date: February 5, 2020
Status: Complete Priority: Default Priority Reporter:

GPS	Auto On Off
ID: 394 Product: Finished Items Version: a0 02 Report Date: January 25, 2020
Status: Complete Priority: Default Priority Reporter: Troy Reabe

Default Type	Returing with a load
ID: 388 Product: Finished Items Version: a0 02 Report Date: September 30, 2019
Status: Complete Priority: Default Priority Reporter: Damon Reabe

Software	AirSpeed and Hopper Zero at startup
ID: 387 Product: Finished Items Version: a0 02 Report Date: September 30, 2019
Status: Complete Priority: Default Priority Reporter: Damon Reabe

Software	Constant Rate
ID: 334 Product: Finished Items Version: N/A Report Date: July 8, 2019
Status: Complete Priority: Low Priority Reporter:

GPS	RS-232 GPS Paint Signal
ID: 333 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Low Priority Reporter: Troy Reabe

Software	Save as and Add Numbers and symbols to chem name
ID: 331 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Low Priority Reporter: Troy Reabe

Software	Change qty in flight
ID: 330 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Joe Hoverson

Software	Show Load counter in flight vs. Chemical Selected.
ID: 329 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Tracey Stokes

Software	Edit Load Counter and Running Total
ID: 328 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Tracey Stokes

Software	Dry out Hopper Sensor (add delay de-bounce)
ID: 327 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter:

Software	Menu Structure- Chem select before load enter
ID: 325 Product: Finished Items Version: a0 02 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Damon Reabe

Software	Software Update Via SD-Card
ID: 324 Product: Finished Items Version: a0 02 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Troy Reabe

Mechanical	Higher Power Motor
ID: 323 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: High Priority Reporter: Joe Hoverson

Software	1/16" increments to 2"
ID: 322 Product: Finished Items Version: a0 01 Report Date: July 8, 2019
Status: Complete Priority: Low Priority Reporter: Joe Hoverson

Software	SD-Card Re-Mounting
ID: 321 Product: Finished Items Version: a0 02 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Troy Reabe

Software	Qty Indication Issue
ID: 320 Product: Finished Items Version: 102 Report Date: July 8, 2019
Status: Complete Priority: Default Priority Reporter: Damon Reabe